HOME > Products > Audio Power Amplifier IC > Stereo ClassD Audio Power Amplifier

HT317
75W PBTL/30W BTL Class D Stereo Amplifier with AM Avoidance

HT317 is a stereo efficient, Class-D audio amplifier for driving speakers up to 75W/4 Ω in mono PBTL. It can also deliver 2×30W/8Ω power in stereo BTL.

HT317 features 2 different power limit functions. One is power clipper (PCLP), which can clip the output voltage under a preset level; another one is AGC which can limit the output music under a preset level without clipping.

Thermal Foldback (TFB) function is designed to protect HT317 from excessive die temperature in case of the device being operated beyond the recommended temperature or power, or with a weak thermal system, without shutting the device down.

Multiple switching Frequency is selectable for HT317 to avoid AM interferences.

HT317 is fully protected against faults with Overvoltage, Undervoltage, Overtemperature, DC-detect, and Overcurrent protection. Faults can be reported to the processor to prevent devices from being damaged


DOWNLOAD THE DATA

FEATURE

  • Output Power (BTL)
    2×30W (VDD=24V, RL=8Ω, THD+N=1%)
    2×23W (VDD=14V, RL=4Ω, THD+N=10%)

  • Output Power (PBTL)
    75W (VDD=24V, RL=4Ω, THD+N=10%)

  • Single Wide Voltage Supply: 4.5V-26V

  • Efficiency > 90%

  • Optional Power Limit Functions: AGC and Power Clipper (PCLP)

  • Integrated Thermal Foldback (TFB) Function

  • Differential / Single-ended Analog Input, BTL or PBTL Output

  • Multiple Switching Frequency

  • Integrated Self-protection Circuits Including Overvoltage, Undervoltage, Overtemperature,
    DC-detect, and Overcurrent with Error Reporting

  • LF and HF Package of TSSOP28-PP


APPLICATIONS

  • Sound Bars           

  • Wireless Speakers

  • Consumer Audio Applications   

  • TVs/Monitors


image.png

TERMINAL FUNCTION

Pin No.

Name

I/O

Description

1

\SD/FAULT

I

SD/FAULT, multi function pin. When pulled down, place the speaker amplifier in shutdown mode.
General fault reporting including Over-Temp, Over-Current, DC Detect.

2

INA+

I

Positive input terminal for A channel

3

INA-

I

Negative input terminal for A channel

4

PLIMT

I

Set the maximum output voltage before clipping (Limiter Level)

5

GVDD

O

Voltage regulator derived from PVDD supply, connect 1uF to GND (NOTE: This pin is provided as a connection point for filtering capacitors
for this supply and must not be used to power any external circuitry)

6

GAIN

I

Adjust the gain of the speaker amplifier

7

LIM

I

Select the mode of Digital Output Clipper or AGC

8

GGND

G

Ground for gate drive circuitry (this terminal should be connected to the system ground)

9

INB-

I

Negative input terminal for B channel

10

INB+

I

Positive input terminal for B channel

11

AM0

I

AM Avoidance Frequency Selection

12

AM1

I

AM Avoidance Frequency Selection

13

MUTE

I

Mute control terminal, the amplifier is muted when it is pulled high

14

AVDD

P

Analog power supply

15,16,17

PVDD

P

Power Supply for amplifier drivers of B channel

18

BSB+

BST

Connection point for the OUTB+ bootstrap capacitor, which is used to create a power supply for the high-side gate drive for OUTB+

19

OUTB+

O

Positive pin for differential speaker amplifier output B

20

OUTB-

O

Negative pin for differential speaker amplifier output B

21

BSB-

BST

Connection point for the OUTB- bootstrap capacitor, which is used to create a power supply for the high-side gate drive for OUTB-

22

BSA-

BST

Connection point for the OUTA- bootstrap capacitor, which is used to create a power supply for the high-side gate drive for OUTA-

23

OUTA-

O

Negative pin for differential speaker amplifier output A

24

OUTA+

O

Positive pin for differential speaker amplifier output A

25

BSA+

BST

Connection point for the OUTA+ bootstrap capacitor, which is used to create a power supply for the high-side gate drive for OUTA

26,27,28

PVDD

P

Power Supply for amplifier drivers of A channel

PAD

PGND

G

Power ground, make sure connect it to the system ground

I: Input; O: Output; G: Ground; P: Power; BST: Boot Strap